This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Jass Kalsi
41
« on: June 30, 2011, 10:21:45 AM »
Few things are as frustrating as dealing with a slow, sluggish computer. When a computer is brand new, it works wonderfully well. Over time, though, its performance can slowly begin to worsen. This happens for a number of reasons, but the biggest culprits are things like spyware, adware and other computer threats that are unwittingly downloaded along with other content while online. You don’t have to download thousands of MP3s, movies or other items to experience these problems, either – nobody is immune to them. Instead of accepting the situation, there are plenty of techniques and strategies that you can use to make it better – a few of the best ones are outlined below.
Strategy #1: Clean Your Computer’s Windows RegistryThe biggest cause of slow, sluggish PC performance is errors and problems within its Windows registry. Adware, spyware and other threats usually target the registry, damaging or misplacing important files within it. When it comes to PC cleaning, a daily Windows registry cleaning should be at the top of your list of priorities. However, this should never be done manually – there are too many opportunities for major errors that could seriously damage your PC’s operating system. Instead, invest in a high-quality Windows registry cleanup program and configure it to run once per day – you won’t believe the difference that it makes.
Strategy #2: Remove Unneeded FilesEvery time you log on to the Internet or otherwise use your computer, temporary files are generated. They are usually only needed once; however, they don’t disappear on their own. Instead, they accumulate over time until they are cluttering up your computer’s file system and affecting its performance. While it’s possible to remove these files one-by-one, it’s much easier and quicker to use a PC cleaning tool that’s designed for the purpose. Try to do so about one time per week to keep your computer humming along with ease.
Strategy #3: Remove Unneeded ProgramsLike many people, you probably download and try out many different programs each month. How many of them do you actually end up using on a regular basis? Chances are, not very many of them. By getting into the habit of uninstalling unused and unneeded programs, you can keep your computer’s file system a lot less cluttered. In turn, your PC’s performance will improve dramatically. You can optimize your computer in this way by using its Add/Remove Programs feature. Its location varies by operating system, but you should be able to find it somewhere in the Control Panel.
Strategy #4: Empty the Recycle BinWhen you click “delete” on a file or a program, it doesn’t go away for good – not immediately, anyway. Instead, it sits in a kind of purgatory in your computer’s Recycle Bin. As things pile up in the Recycle Bin, your computer can start exhibiting some very annoying problems. If sluggish startups and frequent crashes are occurring with increasing frequency – and your computer’s recycle bin is very full – go ahead and empty it. From then on, get into the habit of doing so about one time per week. This small but important strategy can make a huge difference.
Strategy #5: Perform a Disk DefragmentationWindows isn’t very efficient when it comes to storing files. It actually splits them up, depositing them into whatever spaces are available. The more spaced apart the pieces of a file are, the harder your computer has to work to make them run. The Windows disk defragmentation system tune-up utility works to piece all of those files back together again. The process is a long one, though, and only needs to be done about four times per year. Set it up to run automatically once every three months. By doing so, you’ll be able to keep your computer running in tiptop shape.
When it comes to keeping your computer running optimally, small but regular maintenance is the best way to go. Protecting your PC only does so much; even the most careful Internet users in the world unintentionally download malicious software from time to time. By using basic system tune-up tools, cleaning your computer’s Windows registry regularly, performing regular file-cleaning maintenance and otherwise optimizing your PC, you should be able to keep it in like-new condition for a lot longer. Even if your computer has been performing slowly for some time, beginning this regimen is sure to produce results. In the end, you’ll be able to enjoy a computer that flies along – instead of one that spins its wheels.
42
« on: June 30, 2011, 10:21:02 AM »
Setting up a home computer network may sound daunting, but it’s relatively simple, provided you break everything down into specific steps. Home computer networks are ideal for sharing a wireless connection among multiple computers, especially for those who have a home office, teenagers, or another computer configuration.
Purchasing a RouterBefore you begin to worry about software, worry about hardware. A excellent router, like a Cisco router or a Linksys router, will save you from having to endlessly reboot and reprogram while still allowing you to quickly set up a home network. Make sure you buy from a company that has years of experience designing high quality routers that are capable of handling high amounts of traffic (such as data heavy media files). Virtually any home network will run smoothly without irritating slowness or delays.
Wireless BandwidthAfter you’ve purchased a router, the next step is to determine how much bandwidth you are receiving from your wireless connection. This becomes particularly important if you have a household where the network users are habitually downloading movies or other large data files. While a router can rapidly transfer this information, it is constrained by the amount of bandwidth available to the household. A connection that transmits data at 2.4 GHz with a 54 megabit speed is usually adequate to the task.
If your network feels exceptionally sluggish, check to make sure that you are receiving the wireless by ‘pinging’ the network. Alternatively, if you are receiving the full wireless bandwidth but are still experiencing slow results because of the types of media you are transferring, you may consider paying for a faster service.
Software DriversWhile software drivers for networking are fairly easy to find and download from the Internet, purchasing software directly from a computer retailer is recommended as a way to keep your network free of faulty software. A higher incidence of spyware and viruses makes downloading free software inadvisable, especially for something as sensitive as a computer network.
Purchasing software from one of the major companies, such as McAfee or Symantec, will also provide you with another vital component of wireless home networking: a firewall. Because wireless networks are difficult to secure, the best option is to buy software that not only allows you to network, but is built specifically to keep out uninvited users. Firewalls are designed to protect your valuable information behind a tightly secured ‘wall’ which can’t be accessed unless a very specific encrypted code is used.
Basic Set-UpNow that you have all the components, you’ll want to set up the router first. Install the software driver onto each computer that will use the network. Set up a passkey that is fairly hard to break. Avoid simple or obvious terms that an outside user could easily guess. Set up each computer with this information.
The company that is providing your wireless connection will usually assign you a name and a passkey. However, in some configurations, you will be able to reprogram this information.
TroubleshootingNo matter how expertly a system is set up, on occasion a technical problem manifests, resulting in a lack of connectivity for computers. There are a few ways to quickly check what’s working and what’s not.
Usually, problems are caused by one of two things: the software on the computer itself is malfunctioning, and not allowing the computer to connect. You can test this by seeing if any other computers can connect to the network. If they can, the problem is local to that computer. A simple reboot of the software should solve this problem. However, if the software continues to be unable to connect to the internet, you will need to uninstall the software, and then reinstall it. Sometimes, a version can become corrupted. By wiping it clean and starting anew, the problem should resolve itself.
The second most common problem is that the router needs a quick reboot. If you purchase a quality router, you will not have this problem very often, although every now and again even the best routers need a quick reboot. Turn the router off for at least thirty seconds. Switch it back on, and check your connectivity in about ten minutes. This gives the system plenty of time to reset itself.
If this doesn’t work, the wireless provider may temporarily be out. Call your wireless provider to determine if they are experiencing an outage, and when you can expect the resumption of service. If all of these methods don’t resolve your problem, there is a basic flaw in your initial setup.
43
« on: June 30, 2011, 10:20:05 AM »
When we are using internet we have to deal a several logins and passwords and some sites impose some weird usernames and passwords that are impossible to remember.here comes our favourite browser The biggest Mozilla FireFox to store all of our passwords so when you try to access your facebook ,gmail , twitter … accounts you dont have to write every time your informations
this is really great but there is a little problem in this , the problem is that every person using your computer can go and see all of your stored passwords with just a few mouse clicks. hopefully firefox have a feature that can help us to make this private and dont lete anyone except us to see those passwords.
so how you are supposed to Protect your Firefox passwords ,the answer is so simple “set a master password”
The steps to Protect your Firefox passwords are :1. Start Mozilla Firefox
2. Click to Tools
3. Select Option
4. Go to Security Tab
5. Check Use a Master Password
6. Specify your password and Done............
44
« on: June 30, 2011, 10:19:07 AM »
First Open Windows Task Manager (Ctrl+Alt+Delete) or (Ctrl+Shift+Esc)
Now Click On Shutdown Menu..............................Now Go On Turn Off..............Now Click On Turn Off+Press Ctrl (Click+Ctrl) Kathe He Dabne
And See Magic................................. :excited:
45
« on: June 30, 2011, 10:17:19 AM »
Sometimes some of your friends who appear offline in yahoo messenger may not be actually offline, they may in the 'Invisible' mode. This maybe if they are trying to ignore you or are too busy to talk to anyone.
There is this small trick that you can use to find out what the truth is.
Firstly open your yahoo messenger main window and double click on the name of the person whom you want to check. The chat window will open obviously.
Click IMVironment button, select See all IMVironments, select Yahoo! Tools or Interactive Fun, and click on Doodle.
After loading the Doodle imvironment there can be two possibilities
1.If the user is offline Doodle are will show this "waiting for your friend to load Doodle" continuously
2. If the user is online (but in invisible mode), after few seconds (it can take up to one minute, depending on your connection speed), you should get a blank page like in the picture below. So you know that the user is online.
46
« on: June 30, 2011, 10:16:01 AM »
This Firefox tricks will improve the speed & load time of firefox. And you will be able to surf faster.
Type about:config in the address bar, Then look for the following entries, and make the corresponding changes.
network.http.max-connections-per-server =32
network.http.max-persistent-connections-per-proxy =16
network.http.max-connections = 64
network.http.max-persistent-connections-per-server = 10
network.http.pipelining = true
network.http.pipelining.maxrequests = 200
network.http.request.max-start-delay = 0
network.http.proxy.pipelining = true
network.http.proxy.version = 1.0
Lastly right-click anywhere and select New- Integer. Name it nglayout.initialpaint.delay and set its value to 0. This value is the amount of time the browser waits before it acts on information it receives. Enjoy!!
48
« on: June 30, 2011, 10:11:22 AM »
inni information den lyi thanx bro lgda fr 100 posts poorian krnia he paugian..................
1000 posts likhna c......................
49
« on: June 30, 2011, 10:10:46 AM »
hanji bai ji mai das dina :happy:
Eh vakh users nu dite hoye titles ne jo k pj staff de members ne nd pj nu manage karn lai help karde ne.
Administrator pj da karta dharta e. Admin da nam lal rang vich show hoyega nd pj da sara control e. Mere khyal ch pj te do admin ne garned singh nd lal mirch
Sub admins : sub admins admins di help lai ne je admin pj te nai ta sub admin faisla lai sakda. Sub admin ta kai ne bt jinha de mai nam janda oh ne noxious, m chinna urf jhanda amli, jugadi jatt shayd , . . . . . . Ehna de nam green show hunde ne.
globel moderator: globel mods pj sare section di dekh bhal karde ne. Matlab topics del karne, move karne, editing, lock nd hor v kam hone ne pta ni. . . . . . . Ehna da nam black show hunda. Kuj globel mods ne kudrat garewal, pj sarpanch, pinka bhoond . . . .. . . .
moderator: moderator ya local moderator kise pirticular section di moderation kar sakde aa. Ehna da nam baingni rang ch hunda :D:
chat mod : chat mod chat te control karda e .
pj gabhru: pj gabhru oh user ne jo 1000 post complete kar chuke ne te pj te active ne te vadia contribute kar rahe ne. Power ta pta ni hai inha kol k nai mainu ta ni lagdi :waitin:
pj mutyar: pj mutyar v pj gabhru vang hi ne. Khap khana paun lai:hehe :
Admin, sub admin, globel mod, mod, chat mod sab kol power ne. Thodi koi complain a kise de agains ta tuc mod nu report kar sakde o. Agar zroorat hoye ta mods, admins us user nu ban kar sakde ne.
inni information den lyi thanx bro lgda fr 100 posts poorian krnia he paugian..................
50
« on: June 30, 2011, 09:24:35 AM »
Yaar Main Seriously Puchda Pia :mean: Tusi Hasse Majaak ch Lai Jaane Eh Change Kiven Hona........................ :wait:
51
« on: June 30, 2011, 09:18:43 AM »
kyoki tera status aje "Niyana" wala aa lol
Pinkia Tu Jyada He Vadda Ho Gya Lgda Shota Krna Paina..............................  :
52
« on: June 30, 2011, 09:14:17 AM »
Frnd- plz drive slowly & safely
Pbi Frnd- tej bhja haramiya agge
swift ch niri agg baithi aa
ah lines boht vadia laggia menu veer......................
53
« on: June 30, 2011, 08:35:29 AM »
SSA Saarian Nu.......
Main PJ De Baare Kuj Jaankaari Laina Chaunda Haan Saarian Members Di Profile Te Likhia Aunda PJ GABHRU, PJ SPAMMER, PJ SUB ADMIN, PJ MODERATOR, eh ki cheej hai meri profile te ta iddan da kujh aunda ni eh kaato.....................
54
« on: June 30, 2011, 08:18:47 AM »
SSA SAARIAN NU..... :cooll: JE KOI IS SITE TE JET DA STUDENT HAIGA TA MENU PM KRE PLZ YA FR APNI YAHOO ID DE DVE FACEBOOK TE MERIA REQUEST BLOCKED A...........................
55
« on: June 30, 2011, 04:12:57 AM »
khaali khaali hun te bai yr tun thoda late ho geyaa :D: :D:
chalo koi na fer kise din sahi..................
56
« on: June 30, 2011, 04:07:16 AM »
:D: :D: bhukh laggi aa
pack kr ke bheja roti.........................je haini ta............. :D:
57
« on: June 30, 2011, 12:06:50 AM »
It is very annoying to sit back for a long time after hitting the shut down button. Learn some tweaks by which you can make it faster.
The first thing we need to do is access the Registry by going to Start > Run and type in "regedit" (no quotes) then click OK.
Now with the Registry Editor navigate to HKEY_CURRENT_USER \ Control Panel \ Desktop
Under this menu set the keys to the following corresponding values:
HungAppTimeout -> 1000
WaitToKillAppTimeout -> 1000
Further, scroll down to HKEY_LOCAL_MACHINE \ System \ CurrentControlSet \ Control
Set
WaitToKillServiceTimeout -> 1000
58
« on: June 30, 2011, 12:05:35 AM »
Fed-up of wasting your time installing your Operating System (Windows etc.), drivers and other programs again and again?
Think about it, how much time does it take for you to reinstall Windows and then all your needed programs?
(approx)
Installation of
Windows: 40Mins
Drivers: 20Mins
Programs: 40Mins
Total: 1 hour 40 mins at least!!!
We are going to do that all in 15 mins only!
We need to re-install Windows (Or any other OS) frequently when it stops its efficiency or gets messed up due to many cluttered dependencies and modifications.
Here we go!
Basically, what we are going to do is to create a blind image for our C: (or system) drive. Here we will be using Paragon Drive Backup (Version 9 in this article). There are many other programs available for making image from disks: eg. Norton Ghost.
Installation of Paragon Drive Backup
* Download Paragon Drive Backup 9 (or newer version)
* Install it. (Ofcourse you know how to install it)
* Create a rescue CD or rescue removable pendrive using Recovery Media builder or similar option.
* You are done! Your bootable recovery (backup) CD is ready!
Preparing for a backup
(We are talking about C: Drive)
* I would recommend you to do this procedure after a fresh installation of your OS. This will help you save the most stable and compact backup.
* Install all the drivers.
* Install all your important programs.
* Recommendations: Install at least basic programs, an antivirus program (update it too)
Backing up the drive
* Insert your recovery media that we created just now (CD/pendrive)
* Reboot your PC/laptop using the recovery CD/pendrive - Media (you can do so by pressing Del key or F12 key before windows starts. Choose CD/pendrive as first boot device)
* Choose the option "Simple Backup" or similar and select the C: Drive and provide a destination where your backup will be saved (Not C: of course! You can burn the backup to a CD/DVD or a removable storage too!)
* Choose compression level. More the compression level, smaller the size, more time will the backup take.
* After specifying all this, the menu would show: Pending actions. Click on perform or similar option.
* Wait for the backup to be completed.
Restoring the Backup - Whenever you need it.
* Now that you have backup (image) for your C: Drive, you can easily Boot up your PC/Laptop using the recovery media (created above).
* Choose the source backup (image) file. Also provide the destination as C: Drive.
* It would show Pending Actions. Click on Perform.
* Wait for the restoration to be complete.
* After restoration, boot up your PC/laptop using HDD.
* Voila! You are done! Your PC/laptop will now have a fresh installation of Windows along with drivers and basic programs installed. All this within 15 mins!
59
« on: June 29, 2011, 10:22:23 PM »
Disable auto-start applications:
Using this tip, you can minimize the startup time of windows XP and Vista also. You can disable some optional windows applications like windows messenger, Yahoo messenger, QuickTime and many others auto startup programs that run automatically when you start your computer.
Follow the given steps to disable the windows auto run applications:
To use this feature, you will need to be logged into your computer with administrative rights.
Click Start button and type msconfig in Run option then press Enter for next.
A small System Configuration Utility dialog box will appear with many options like General, System.ini Win.ini, Boot.ini, Services, Startup and Tools.
Now select Startup tab and uncheck the applications that you want to disable from windows startup.
Now click on Apply button to implement the changes then click on Ok button to end the configuration process.
Again close the all program and restart your computer after any changes to go into effect.
60
« on: June 29, 2011, 10:21:08 PM »
One of the best ways of using Pen Drive is as a temporary storage device i.e. RAM for our system, to increase the general boot up speed and also operational speed of the system.
It can be possible with any kind of Windows operating system, all you need is a
pen drive of minimum 1GB memory.
Now go with the following steps:
1. Insert the Pen Drive with 1GB at least in the USB port, better to prefer 4GB.
2. Wait for the PC to detect the pen drive.
3. After detecting it, there is a real and smart thing to do.
4. Right click on My Computer--> Properties.
5. Advanced--> Performance Settings.
6. Advanced--> Change.
7. Select the Pen Drive.
8. Click on Custom Size.
“Check the value of space available”
9. Enter the same in the Initial and Max columns.
“Here you just used the space of Pen Drive as a Virtual Memory”.
10. Now restart your PC.
Finally check the general start up time and also speed of your PC. So, you can have a high speed system in low cost.
:cooll:
|
Show Posts